ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector

ODM 1310nm 10km 10G SFP+ Optical Transceiver Duplex LC Connector

Huawei Compatible 10GBase-LR SFP+ Transceiver (SMF, 1310nm, 10km, DOM, LC)

Product Features
● Supports up to 11.3Gb/s bit rates

● 100% HP Compatible

● SFP+ Transceiver Module

● Singlemode Fiber (SMF)

● Up to 10km Reach

● 1310nm Wavelength

● Duplex LC Connector

● Digital Diagnostics (DDM)

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

Product Descriptions

Olinkcom’s OLSP311XL-CD10 delivers 10 Gigabit connectivity over singlemode fiber cable with a range of up to 10km.

It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment.


Applications
● 10G Base-LR
● 10G Fiber Channel
● 10G Ethernet

Compatibility

Olinkcom's Huawei Compatible 10GBASE-LR SFP+ transceiver can be worked with the below Huawei network equipment.